NEC Express5800/320Ma Technical Reference Manual page 51

Table 3-2. ftSMC System Inventory Component Actions (Continued)
Action
Set Rdr Lun Load
Balancing
Set Resync Priority
Start Slot
Identification
Stop Slot
Identification
Stop Verify
Synchronize SEL
date and time with
System
Update BMC
Firmware
Update Firmware
Update ID Prom
Update Network
Settings
Verify RDR Virtual
Disk
Description
Sets read load balancing for RDR virtual disks to on or off.
Sets the resynchronization priority for individual RDR disks.
Causes the LEDs on the disk in the slot to flash so that you can physically
locate a disk that is experiencing a problem.
Stops the LEDs on the disk from flashing. See Start Slot Identification.
Stops the RDR disk verification operation.
Assigns the current system date and time to the
Updates the BMC firmware. See the Express5800/320Ma: Software
Installation and Configuration Guide for details.
Updates a device's firmware (for example, the BIOS in the CPU element, or
the firmware for storage enclosures or VTMs). Prompts you to enter the path
of the file containing the updated firmware and copies the file to the
appropriate location. This action may be unavailable if the device is online.
See the Express5800/320Ma: Software Installation and Configuration Guide
for details.
Updates the IDPROM information. See IDPROM in
information. When you finish, click Apply. A dialog box displays the status of
the operation.
Updates the VTM network settings.
Verifies the integrity of RDR disk mirrors.
SELTime
ftSMC Component Properties and Actions
ftSMC Component Actions
property.
Table 3-1 for IDPROM
3-27