NEC Express5800/320Ma Technical Reference Manual page 29

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Diag Status:
FailingTestNumberr
Diag Status:
NumberOfFailedTests
Diag Status: TimeOfLastRun
DiagnosticStatus
Dial-in Password
Dial-in User Name
Drive
DriverName
DriverServiceName
DriverVersion
DumpNumberOfFilesToSave
Description
If diagnostic test(s) failed, the number of the diagnostic test(s) that
failed.
The number of errors encountered. See the system event log for a
description of the errors.
Date and time when diagnostics most recently ran.
The VTM diagnostic status.
Password used to authenticate a dial-in user name.
Dial-in user name used to identify the ASN dialing in. After the
system authenticates the name, the system hangs up and dials the
ASN.
The drive letter, including the colon, of the file.
The driver file name of the device.
Name of the service supporting this driver.
Version number of the driver.
Sets the number of dump files to save to disk for a system dump.
For example, if this value is 2, the last two dump files
(Memory0.dmp and Memory1.dmp) are saved and the third dump
file overwrites the first. Thus, you need to reserve disk space of the
size of memory times this number for the dump files. The valid
range is 1 to 5, and the default is 2.
ftSMC Component Properties and Actions
ftSMC Component Properties
3-5