2 | Scanner Engine Command Barcodes
INSTRUCTIONS: Scan command barcode(s) to quickly configure the barcode scanner.
Make sure the CHS is not connected to a host computer or device before scanning a command
barcode!
To use the CHS on multiple hosts, perform the unpair sequence. For instructions, see User's Guide.
By default, the CHS is in HID mode as a Keyboard device.
You may want to cover adjacent barcodes before scanning a command barcode to prevent scanning the
wrong code.
For scanners in Bluetooth SPP or iOS mode, you can alternatively configure some settings by using the
Scanner Settings app.
© Socket Mobile, Inc.
Command Barcodes for CHS 7Ci, 7Di, 7DiRx
8