Socket CHS 7Di Command Barcodes page 62

Bluetooth cordless hand scanner (chs) 1d imager models

Hide thumbs Also See for CHS 7Di:

Table of Contents

4 - 66 SE655 Decoded Linear Imaging Engine

Enable/Disable GS1 DataBar Expanded

Parameter # F0h 54h

To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.

Convert GS1 DataBar to UPC/EAN

Parameter # F0h 8Dh

This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols. When this conversion is

enabled, GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols encoding a single zero as the first digit have the

leading '010' stripped and the bar code reported as EAN-13.

Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code reported as

UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to converted bar

codes. Note that neither the system character nor the check digit can be stripped.

*Enable GS1 DataBar Expanded

(01h)

Disable GS1 DataBar Expanded

(00h)

Enable Convert GS1 DataBar to UPC/EAN

*Disable Convert GS1 DataBar to UPC/EAN

CHS 7Ci, 7Di, 7DiRx Command Barcodes

Table of Contents