Matrix 2 Of - Socket CHS 7Di Command Barcodes

4 - 54 SE655 Decoded Linear Imaging Engine

Matrix 2 of 5

Enable/Disable Matrix 2 of 5
Parameter # F1h 6Ah
To enable or disable Matrix 2 of 5, scan the appropriate bar code below.
Set Lengths for Matrix 2 of 5
Parameter # L1 = F1h 6Bh L2 = F1h 6Ch
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only Matrix 2 of 5 symbols containing a selected length. Select
•
the length using the numeric bar codes beginning on
with 14 characters, scan Matrix 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error or to
change the selection, scan
Two Discrete Lengths - Select this option to decode only Matrix 2 of 5 symbols containing either of two selected
•
lengths. Select lengths using the numeric bar codes beginning on
of 5 symbols containing either 2 or 14 characters, select Matrix 2 of 5 - Two Discrete Lengths, then scan 0, 2, 1,
and then 4. To correct an error or to change the selection, scan
Length Within Range - Select this option to decode a Matrix 2 of 5 symbol with a specific length range. Select
•
lengths using the numeric bar codes beginning on
containing between 4 and 12 characters, first scan Matrix 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2
(enter a leading zero for single digit numbers). To correct an error or change the selection, scan
.
Any Length - Scan this option to decode Matrix 2 of 5 symbols containing any number of characters within the digital
•
scanner's capability.
Enable Matrix 2 of 5
(01h)
*
Disable Matrix 2 of 5
(00h)
Cancel on page 65.
page 64.
CHS 7Ci, 7Di, 7DiRx Command Barcodes
page 64. For example, to decode only Matrix 2 of 5 symbols
page 64. For example, to decode only Matrix 2
Cancel on page
For example, to decode Matrix 2 of 5 symbols
65.
Cancel on page 65
50