Isbt Concatenation Redundancy - Socket CHS 7Di Command Barcodes

Check ISBT Table
Parameter # F1h 42h
The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If you
set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs found in this table. Other
types of ISBT codes are not concatenated.

ISBT Concatenation Redundancy

Parameter # DFh
If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number of times the digital scanner
must decode an ISBT symbol before determining that there is no additional symbol.
Scan the bar code below, then scan two numeric bar codes in
and 20. Enter a leading zero for single digit numbers. To correct an error or change a selection, scan
The default is 10.
*
Enable Check ISBT Table
(01h)
Disable Check ISBT Table
(00h)
Numeric Bar Codes on page 64
ISBT Concatenation Redundancy
CHS 7Ci, 7Di, 7DiRx Command Barcodes
Parameter Menus 4 - 35
to set a value between 2
Cancel on page 65.
31