MSI Check Digits
Parameter # 32h
These check digits at the end of the bar code verify the integrity of the data. At least one check digit is always required.
Check digits are not automatically transmitted with the data.
If two check digits are selected, also select an
Transmit MSI Check Digit
Parameter # 2Eh
Scan this symbol to transmit the check digit with the data.
Scan this symbol to transmit data without the check digit.
*One MSI Check Digit
(00h)
MSI Check Digit Algorithm on page
Two MSI Check Digit
(01h)
Transmit MSI Check Digit (Enable)
(01h)
*Do Not Transmit MSI Check Digit (Disable)
(00h)
CHS 7Ci, 7Di, 7DiRx Command Barcodes
Parameter Menus 4 - 63
60.
59