4 - 42 SE655 Decoded Linear Imaging Engine
Set Lengths for Code 93 (continued)
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example,
select Code 93 Two Discrete Lengths, then scan 0, 2, 1, 4, to limit the decoding to only Code 93 symbols containing
2 or 14 characters. Numeric bar codes begin on
page
64. To change the selection or cancel an incorrect entry, scan
Cancel on page
65.
Code 93 - Two Discrete Lengths
Length Within Range - This option sets the unit to decode a code type within a specified range. For example, to
decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 Length Within Range, then scan
0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
page
64. To
change the selection or cancel an incorrect entry, scan
Cancel on page
65.
Code 93 - Length Within Range
Any Length - Scan this option to decode Code 93 symbols containing any number of characters.
Code 93 - Any Length
CHS 7Ci, 7Di, 7DiRx Command Barcodes
38