Code 128 - Socket CHS 7Di Command Barcodes

Code 128

Enable/Disable Code 128
Parameter # 08h
To enable or disable Code 128, scan the appropriate bar code below.
Set Lengths for Code 128
Parameter # L1 = D1h L2 = D2h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains. Set lengths for Code 128 to any length, one or two discrete lengths, or lengths within a specific range.
NOTE When setting lengths for different bar code types, enter a leading zero for single digit numbers.
One Discrete Length - Select this option to decode only Code 128 symbols containing a selected length. Select the
•
length using the numeric bar codes beginning on
characters, scan Code 128 - One Discrete Length, then scan 1 followed by 4. To correct an error or change the
selection, scan Cancel on page
Two Discrete Lengths - Select this option to decode only Code 128 symbols containing either of two selected
•
lengths. Select lengths using the numeric bar codes beginning on
symbols containing either 2 or 14 characters, select Code 128 - Two Discrete Lengths, then scan 0, 2, 1, and
then 4. To correct an error or change the selection, scan
Length Within Range - Select this option to decode a Code 128 symbol with a specific length range. Select
•
lengths using numeric bar codes beginning on
between 4 and 12 characters, first scan Code 128 - Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading
zero for single digit numbers). To correct an error or change the selection, scan
Any Length - Select this option to decode Code 128 symbols containing any number of characters within the digital
•
scanner's capability.
*
Enable Code 128
(01h)
Disable Code 128
(00h)
page 64. For example, to decode only Code 128 symbols with 14
65.
page 64. For example, to decode Code 128 symbols containing
CHS 7Ci, 7Di, 7DiRx Command Barcodes
64. For example, to decode only Code 128
page
Cancel on page 65.
Cancel on page
Parameter Menus 4 - 31
65.
27