Socket CHS 7Di Command Barcodes page 2

1 | General Command Barcodes
INSTRUCTIONS: Scan command barcode(s) to quickly configure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
All Bluetooth Connection Modes OK
Scan only with CHS in SPP or iOS Mode
Scan only with CHS in HID Mode
Make sure the CHS is not connected to a host computer or device before scanning a command
barcode!
To use the CHS on multiple hosts, perform the unpair sequence. For instructions, see User's Guide.
By default, the CHS is in HID mode as a Keyboard device.
You may want to cover adjacent barcodes before scanning a command barcode to prevent scanning the
wrong code.
For scanners in Bluetooth SPP or iOS mode, you can alternatively configure some settings by using the
Scanner Settings app.
© Socket Mobile, Inc. Command Barcodes for CHS 7Ci, 7Di, 7DiRx 2