Socket CHS 7Di Command Barcodes page 15

Bluetooth cordless hand scanner (chs) 1d imager models

Hide thumbs Also See for CHS 7Di:

Table of Contents

Decode UPC/EAN Supplementals (continued)

Decode UPC/EAN Supplemental Redundancy

Parameter # 50h

With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol without

supplementals are decoded before transmission. The range is from 2 to 20 times. Five or above is recommended when

decoding a mix of UPC/EAN symbols with and without supplementals, and the autodiscriminate option is selected.

Scan the bar code below to select a decode redundancy value. Next scan two numeric bar codes beginning on

Single digit numbers must have a leading zero. To change the selection or cancel an incorrect entry, scan

Enable 977 Supplemental Mode

(07h)

Enable 414/419/434/439 Supplemental Mode

(06h)

Enable 491 Supplemental Mode

(08h)

Enable Smart Supplemental Mode

(03h)

Decode UPC/EAN Supplemental Redundancy

(Default: 7)

CHS 7Ci, 7Di, 7DiRx Command Barcodes

Parameter Menus 4 - 19

page

64.

Cancel on page 65

Table of Contents