Socket CHS 7Di Command Barcodes page 13

Decode UPC/EAN Supplementals
Parameter # 10h
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2).
The following options are available:
If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus
•
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with
•
supplemental characters, and ignores symbols without supplementals.
If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with
•
supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode the bar
code the number of times set via
data to confirm that there is no supplemental.
If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13 bar codes
•
starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the scanner
must decode the bar code the number of times set via
before transmitting its data to confirm that there is no supplemental. The scanner transmits UPC/EAN bar codes that
do not have that prefix immediately.
• Enable 378/379 Supplemental Mode.
• Enable 978/979 Supplemental Mode.
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
NOTE
Enable/Disable Bookland EAN on page 11
Bookland ISBN Format on page
• Enable 977 Supplemental Mode.
• Enable 414/419/434/439 Supplemental Mode.
• Enable 491 Supplemental Mode.
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed previously.
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
NOTE
characters.
Decode UPC/EAN Supplemental Redundancy on page 15
Decode UPC/EAN Supplemental Redundancy on page 15
to enable Bookland EAN, and select a format using
12.
CHS 7Ci, 7Di, 7DiRx Command Barcodes
Parameter Menus 4 - 17
before transmitting its
13