Socket CHS 7Di Command Barcodes page 37

Bluetooth cordless hand scanner (chs) 1d imager models

Hide thumbs Also See for CHS 7Di:

Table of Contents

Code 93

Enable/Disable Code 93

Parameter # 09h

To enable or disable Code 93, scan the appropriate bar code below.

Set Lengths for Code 93

Parameter # L1 = 1Ah L2 = 1Bh

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code

contains. Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths within a specific range.

One Discrete Length - Select this option to decode only those codes containing a selected length. For example, select

Code 93 One Discrete Length, then scan 1, 4, to limit the decoding to only Code 93 symbols containing 14 characters.

Numeric bar codes begin on

Enable Code 93

*Disable Code 93

page

64. To change the selection or cancel an incorrect entry, scan

Code 93 - One Discrete Length

CHS 7Ci, 7Di, 7DiRx Command Barcodes

(01h)

(00h)

Parameter Menus 4 - 41

Cancel on page

65.

Table of Contents