Advertisement
8.
Remove the slot bracket from an available PCI slot,
then secure the Serial port cable with the slot bracket
holding screw. Skip this step if the second serial port is
not needed.
9.
Replace the computer cover and reconnect the power
cord.
Software Installation
This section provides information on how to install the
Low Profile PCI-2S drivers.
Windows 95
1.
At the Update Device Driver Wizard, click Next.
2.
Insert the driver CD, and click Other Locations.
Type in D:\9x, click OK, then Finish. (Change D: to
match your CD-ROM drive letter)
3.
From the Insert Disk window, click OK. When the
Copying Files dialog box appears, type in
D:\9x, then click OK.
4.
Restart Windows to complete the installation.
Windows 98/98SE
1.
At the Add New Hardware Wizard, click Next.
2.
Select Search for the best driver for your device
(Recommended), then click Next.
3.
Insert the driver CD, check Specify a location,
uncheck the other boxes, type in D:\9x, then click
Next. (Change D: to match your CD-ROM drive
letter)
4.
Click Next, then Finish.
5.
Repeat steps 1-4.
6.
Restart Windows to complete the installation.
4
Advertisement
