Advertisement
Quick Links
Gigabit Ethernet PCIe
Introduction
The Gigabit Ethernet PCIe 4-Lane Card adds Gigabit
Ethernet ports to your PCIe-enabled server or
desktop systems.
Specifications
•
Bus connector: PCI Express x4
•
Version: PCI Express 2.1
•
Network transfer rate: 10/100/1000 Mbps
System Requirements
•
Desktop PC with one available PCIe slot
•
Windows
bit) / 7 (32-/64-bit)
•
Windows Server 2012 R2 / 2012 (32-/64-
bit) / 2008 R2 / 2008 & 2003 (32-/64-bit)
04-1056A
4-Lane Card
Installation Guide
10 (32-/64-bit) / 8.x (32-/64-
®
1
Advertisement
Related Manuals for SIIG LB-GE0114-S1
Summary of Contents for SIIG LB-GE0114-S1
-
Page 1: Installation Guide
Gigabit Ethernet PCIe 4-Lane Card Installation Guide Introduction The Gigabit Ethernet PCIe 4-Lane Card adds Gigabit Ethernet ports to your PCIe-enabled server or desktop systems. Specifications • Bus connector: PCI Express x4 • Version: PCI Express 2.1 • Network transfer rate: 10/100/1000 Mbps System Requirements •... -
Page 2: Package Contents
Package Contents • Gigabit Ethernet PCIe 4-Lane Card • Low profile bracket • Driver CD • Installation guide Hardware Installation Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer case for a few seconds. - Page 3 Carefully align the card's bus connector with the selected PCI Express slot on the motherboard. Push the card down firmly, but gently, until it is well seated. Replace the slot bracket holding screw to secure the card. Replace the computer cover and reconnect the power cord.
- Page 4 To Verify Installation Right click This PC or Computer on the desktop, click Manage, then click Device Manager. Double click Network adapters, and below should be displayed. * 2-port: * 4-port: For more details, please go to the Support section at www.siig.com.