Advertisement
Software Installation
This section provides the steps on how to install the
Low Profile PCI-1P drivers. Please make sure the board is
installed before proceeding with the driver installation.
Windows 95 Driver Installation
1.
At the Update Device Driver Wizard, click Next.
2.
Insert the driver CD and click Other Locations.
3.
Type in X:\1P\95, click OK, then click Finish.
(Change X: to match your CD-ROM drive letter)
4.
From the Insert Disk window, click OK. When the
Copying Files dialog box appears, type in X:\1P\95,
then click OK. (Change X: to match your CD-ROM
drive letter)
5.
Restart Windows to complete the driver installation.
Windows 98/98 SE Driver Installation
1.
At the Add New Hardware Wizard, click Next.
2.
Select Search for the best driver for your device
(Recommended), then click Next.
3.
Select Specify a location, uncheck the other boxes,
insert the driver CD, type in X:\1P\98, then click
Next. (Change X: to match your CD-ROM drive
letter)
4.
Click Next, then Finish.
5.
Restart Windows to complete the driver installation.
Windows ME Driver Installation
1.
At the Add New Hardware Wizard, choose Specify
the location of the driver (Advanced), then click
Next.
4
Advertisement
