Advertisement
Software Installation
This section provides the steps on how to install the
DP CyberParallel Dual drivers. Please make sure the board
is installed before proceeding with the driver installation.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server
2008 R2
1.
Install the board and boot up Windows.
2.
Right click Computer, click Manage, click Device
Manager.
3.
Insert the driver CD. Close the AutoPlay box if
prompted.
4.
Right click PCI Parallel Port listed first, click Update
Driver Software.
5.
Click Browse my computer for updated software.
For 32-bit: Type D:\32bit, click Next. (Change D: to
match your CD-ROM drive letter)
For 64-bit / 2008 R2: Type D:\64bit, click Next.
Change D: to match your CD-ROM drive letter)
6.
At Windows has successfully updated your driver
software, click Close.
7.
Go back to Device Manager, right click PCI Parallel
Port, then click Update Driver Software.
8.
Repeat steps 5 & 6, then restart the computer to
complete the installation.
Windows Vista (32-/64-bit) / Server 2008 (32-/64-
bit)
1.
At the Found New Hardware window, click Locate
and install driver software (recommended), then
click Continue.
4
Advertisement
