Table of Contents
Advertisement
Chapter 3
Software Installation
This chapter provides information on how to install the
drivers and utilities provided on the Driver and Utilities CD.
It includes drivers and utilities for the following operating
systems:
Windows 95/98
Windows NT 4.0
Please refer to the section for the operating system you will
be running for its installation instructions.
Note Make sure you have installed the card in
your system BEFORE installing the software.
3-1 Windows 95/98 Driver Installation
Follow the procedures listed below to install the Windows
95/98 drivers and related files:
3-1.1 Windows 95/98 Driver Installation
1. Start up Windows 95/98 operating system.
2. The "New Hardware Found" dialog box displays the
message "PCI Multimedia Audio Device". Click on
"Cancel" and let Windows boot up completely.
3. Insert the Driver and Utilities disc into your CD-ROM
drive, if Autorun starts, go to step #4.
If your system does not support Autorun, select Start,
Run and type in: "D:\demo32.exe" and click on "OK".
(Assuming D:\ is the CD-ROM drive letter)
4. Click on "YMF724" to initiate driver installation.
Software Installation
3-1
Advertisement
Table of Contents
