Altigen ACM 6.5 Administration Manual page 254

Configuring the AltiGen IP Phone
Parameter
Program-
mable
Keys
240
MAXCS ACM 6.5 Administration Manual
Description
Use the drop-down list to assign one of the following functions
to the desired keys:
—
• N/A when selected, the corresponding programmable key
cannot be used.
• BLF (Busy Lamp Field)
number in the field below; this will be associated with the
corresponding programmable key to this extension number;
the light in this programmable key indicates that the
extension number is busy or ringing. You can select the Play
Beep Tone check box to also have the IP phone play an
audible beep or one of several different ring tones when the
extension number is ringing.
Note: The BLF feature can be assigned only to internal
extension numbers, not outside numbers.
—
• Feature Code when selected, enter a MAXCS feature code
in the field below; this will be associated with the
corresponding programmable key to dial this feature code.
• Admin Defined # - when selected, this programmable key
can be configured by the administrator only. Enter a valid
number 0~9, *, #, or F (Flash) in the field below.
One use for this can be to tag a call with an account code by
pressing one button. For example, entering F#321 in
programmable key 1 will cause a connected call to be tagged
with account code 1 (F is for Flash, #32 is the extension
feature code, and in this example, 1 is the account code).
Account codes are set up in System Configuration, Account
Code tab.
• Line Park - when selected, enter the Line Park line ID in the
field below. The user can press this programmable key to
park a call or to retrieve a parked call.
• Call Record - when selected, the user can press this
programmable key to start conversation call recording. This
only works for extensions with Record on Demand selected
in the Extension Configuration window.
• WG Status - (IP710 only) When selected, the user can press
this programmable key to see the real-time workgroup
status (callers in queue, longest queue time, number of
callers who have waited longer than the service threshold,
and service level).
• User Defined # - (Default) Allows the user to define the
programmable key from the IP phone.
—
when selected, enter an extension