Setting Up Huntgroups
Set up new huntgroups in the Huntgroup Configuration window.
To add a hunt group:
1. Click the Add button under the Group List. The Add New Group dialog box opens.
2. Type in a group number for the hunt group.
3. Check the Global group check box if you want the group to be visible to other
systems within the VoIP domain. See Chapter 25, "Enterprise VoIP Network
Management" for more information.
4. Click OK.
Establishing Basic Hunt Group Attributes
After you create a hunt group, you can set basic attributes in the Huntgroup
Configuration, General tab:
To set Group Information, type in the following:
First Name and Last Name—each with a maximum of 32 characters.
•
Password—the default is the system default password set on the Number Plan tab
•
of the System Configuration window.
A valid password cannot be the same as its hunt group number and must be 4–8
digits (numbers or letters A–Z) in length. Basic password patterns, such as repeated
digits (1111), consecutive digit strings (1234), or digits that match the extension
(Ext. 101 using 1012, 9101, 10101, etc.) are not recommended. The letters map
to numbers (on a phone, for example) as follows:
Numbers
2
3
4
5
Letters
Numbers
A, B, C, a, b, c
6
D, E, F, d, e, f
7
G, H, I, g, h, i
8
J, K, L, j, k, l
9
Setting Up Huntgroups
Letters
M, N, O, m, n, o
P, Q, R, S, p, q, r, s
T, U, V, t, u, v
W, X, Y, Z, w, x, y, z
MAXCS ACM 6.5 Administration Manual 259