Front Panel Indicator: Sw/Led、Pwrled、Speaker; Audio Port Connectors - Albatron PM800 Series User Manual

Serial and Parallel Interface Ports
The mainboard comes equipped with one serial port , one VGA port and one parallel port on the back
panel. These interface ports will be explained below.
Parallel Interface Port: PRT
The parallel port on your system has a 25-pin, DB25 connector and is used to interface with parallel
printers and other devices using a parallel interface.
The Serial Interface: COM
The serial interface port is sometimes referred to as an RS-232 port or an asynchronous communication
port. Mice, modems and other peripheral devices can be connected to a serial port.
Video Graphics Array Conn.: VGA
The PM800 series has built in video facilities. Your monitor attaches directly to the VGA connector on
this mainboard.

Audio Port Connectors

Speaker Out is used to connect to speakers or headphones. If the Super 5.1 driver is installed the
Speaker Out becomes the Front Speaker.
Line In can be connected to an external CD player, Tape player or other audio devices for audio input.
If the Super 5.1 driver is installed Line In becomes the Rear Speaker.
Mic In is used to connect to a microphone. If the Super 5.1 driver is installed the Mic In becomes the
Subwoofer/ Center out.
This mainboard supports Super 5.1 Channel Audio effects which turns
your standard Speaker Out, Lin In, Mic In audio connectors into a 6
PC_B EEP
1
channel audio system. See Appendix I for more information.
NC
Front Ground
+5V
SPEAKER
+
1
-
3
PWRLED
Hard Driver
LED
Reset Control (-)
Reset
Reset Control (+)
Button
Print Port
COM VGA
Mic-in
(Subwoofer/Center out)
Line-in
(Rear Speaker out)
Speaker-out
(Front Speaker out)
14
DI M M 1
DI M M 2
1 2
Power LED (+)
HDLED(+)
HDLED(-) Power LED (-)
Power Button (+)
Power Button (-)
NC NC
9 10
SW/LED
PM800 Series
Power
LED
Power-on
Button