Watch Dog Timer - Albatron PM800 Series User Manual

Supports Serial ATA 150 MB/sec transfers
Supports RAID 0 or RAID 1 software with this controller
BIOS:
Phoenix-Award™ BIOS
Supports APM1.2
Supports ACPI2.0 power management

Watch Dog Timer:

This mainboard contains a special feature called the "Watch Dog Timer" which is used to
detect when the system is unable to handle over-clocking configurations during the POST
stage. Once a problem is detected the system will reset the configurations and reboot the
system after five seconds.
5
PM800 Series