Albatron PM800 Series User Manual page 44

PCI PME Wake Up
When you select "Enabled", a PME signal from any PCI card will awaken the system from suspend mode.
Options: Disabled (default)、Enabled.
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call a modem device. Options:
Disabled (default)、Enabled
RTC Wake Up
When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode. Options: Enabled、Disabled (default)
Date (of Month)
You can choose which month the system will boot up. This field is only configurable when "RTC Wake
Up" is set to "Enabled"
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up. This field is only configurable
when "RTC Wake Up" is set to "Enabled"
IRQs Activity Monitoring
Press Enter to access a sub menu used to configure the different wake up events (i.e. wake on LPT &
COMM activity).
Primary INTR
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT2)
IRQ6 (Floppy Disk)
IRQ7 (LPT1)
IRQ8 (RTC Alarm)
On IRQ9 (IRQ2 Redir)
Disabled IRQ10 (Reserved)
Enabled IRQ11 (Reserved)
Enabled IRQ12 (PS/2 Mouse)
Enabled IRQ13 (Coprocessor)
Enabled IRQ14 (Hard Disk)
Disabled IRQ15 (Reserved)
40
PM800 Series
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled