Albatron PM800 Series User Manual page 59

Array
1. You can delete an existing array with the "Delete Array" option on the main screen. Choose the
"Delete Array" option and press <Enter>. Then press the <Enter> key once again and the system
will mark all the existing SATA devices with an asterisk (as shown below in the bottom section).
(Note that the example information below may differ slightly depending on the RAID type you are
configuring.)
2. Press <Enter>. A warning/confirmation message will display (as shown below). Press <Y> to
confirm.
3. After the array is successfully deleted, the screen will display as shown below.
55
PM800 Series