Audio Connectors; Slots - Albatron PM800 Pro (V2.0) User Manual

Via pm800 & vt8237 supports socket 478 intel pentium 4 (willamette/ northwood/ prescott) processor
Hide thumbs Also See for PM800 Pro (V2.0):
Table of Contents

Advertisement

Audio Connectors

This mainb
oard provides three connectors as part of its audio Subsystem.
CD-ROM Audio-In
This header is used to connect to a CD-ROM / DVD audio cable.
JCDIN1
Front Panel Audio Header: JAUDIO1
Pin Assignment
1 Mic in/center
3 Mic power/Bass
Right line out/
5
Right
7 Reserved
9 Left line out/Speaker out Left
Right line in
11
Right
13 Left line in/Rear speaker Left

Slots

T
he slots in this mainboard are designed for expansion cards used to complement and enhance the
functionality
of the mainboard.
AGP Slot: AGP
This mainboard is equipped with
1.5v or 0.8V) AGP card
s.
PCI Slots: PCI1-3
T
his mainboard is equipped with 3 standard PCI slots. PCI stands for Peripheral Component
Interconnect and is a bus
C
NR1: Communication Network Riser Slot(Optional)
The CNR specification is an open Industry Standard Architecture, and it defines a hardware scalable riser
card interface, which supports modem only.
Header: JCDIN1
Pin
1
1
2
3
4
2
1
Pin Assignment
2 Ground
4 Audio power
Speaker out
6 Right line
8 Key
10 Left line out/Speaker out Left
/Rear speaker
12 Right
14 Left line in/Rear speaker Left
an Accelerated Graphics Port (AGP) that supports AGP 3.0 (8X/ 4X,
standard for expansion cards. This PCI slot is designated as 32 bit.
14
PM800 Pro(V2.0)
Assignment
Left channel input
Ground
Ground
Right channel input
14
13
JAUDIO1
out/Speaker out Right
line in/Rear speaker Right

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm800 pro 2.0

Table of Contents