Audio Connectors - Albatron kx600s Instruction Manual

This Manual: http://www.manuallib.com/file/2538033

Audio Connectors

1 2
MIC Ground
MIC_VREF +5V
Front out_R Rear out_R
NC NC
Front out_L Rear out_L
9 10
FRONT AUDIO
CD-ROM Audio-In Header: CD-IN
This header is used to connect to a CD-ROM / DVD audio cable.
Front Panel Audio Header: FRONT AUDIO
If your computer case has been designed with embedded audio equipment or you are using an audio
bracket (optional). You can attach these components to the FRONT_AUDIO header of the
mainboard. First remove the jumper caps covering the FRONT_AUDIO pins. Use pins 1, 3 to
connect to the case microphone. Use pins 9,5 to connect to the earphone. If you do not intend to use
the FRONT_AUDIO panel, do not remove the jumper caps. The front panel audio & the back panel
audio can not use simultaneously.
If the jumper caps are in place, jumper cap 1 is on pin 5, pin 6 and
jumper cap 2 is on pin 9, pin 10. If you do not intend to use the
FRONT_AUDIO panel, do not remove the jumper caps.
Attention：The front panel audio & the back panel audio can not
use simultaneously.
KX600S PRO/ KX600S
PWR
1
1
NC
2
2
SPD_OUT
3
3
Ground
4
4
SPD_IN
5
CD-IN
SPDIF
18
Left In
Ground
Ground
Right In
D IMM 1
D IMM 2
D IMM 3