Audio Connectors - Albatron KM333 Series User Manual

Audio Connectors

CD-ROM Audio-In Header: CD-IN
This header is used to connect to the CD-ROM/DVD audio cable
Front Panel Audio Header (Orange): FRONT AUDIO
If your computer case has been designed with embedded audio equipment. You can
attach these components to the FRONT_AUDIO panel of the mainboard. First remove the
jumper caps covering the FRONT_AUDIO pins. Use pins 1, 3 to connect to the case
microphone. Use pins 9,5 to connect to the earphone. If you do not intend to use the
FRONT_AUDIO panel, do not remove the jumper caps. The front panel audio effect and
the back panel audio effect cannot simultaneous
S/PDIF Header (Red): SPDIF
S/PDIF (Sony/Philips Digital Interface) is an audio transfer file format, which provides high
quality audio using optical fiber and digital signals. This mainboard is capable of
delivering audio output through the SPDIF header. The SPDIF devices that are sending
from this header must be compliant for optimal effect.
Attention：If the jumper caps are in place, jumper cap
1 is on pin5, pin6 and jumper cap2 is on pin9, pin10.
19
KM333 Series
function.