Back Panel Configuration - Albatron PM800 Pro (V2.0) User Manual

3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module snaps
into place.
4. Repeat steps 1-3 for the remaining RAM modules.
* The pictures above are for reference only and may vary slightly for your mainboard.

Back Panel Configuration

JKBMS1
PS/2 PS/2
Mouse Mouse
PS/2 PS/2
Keyboard Keyboard
PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS
This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin
assignments are described below:
PS/2 Mouse
PS/2 Keyboard
USB & LAN Connectors: USB
There are four USB connectors on the back panel. These USB connectors are used to attach to USB
devices such as: keyboards, mice and other USB devices. You can plug the USB devices directly into
these connectors..
JPRNT1
Parallel Parallel
COM1 COM1 VGA1 VGA1
JCOM1
JVGA1
Pin Assignment
1
2 No connect
3 Ground
9
PM800 Pro(V2.0)
JUSBLAN1
LAN LAN
JAUDIO1
JUSB1
Line In Line In
Speaker Out Speaker Out
Mic In Mic In
USB x2 USB x2
USB x2 USB x2
Pin Assignment
Data 4 +5 V (fused)
5
6 No connect
Clock