Audio Connectors - Albatron KX600 PRO User Manual

Audio Connectors

MIC
MIC_VREF
Front out_R
NC
Front out_L
FRONT AUDIO
CD-ROM Audio-In Header: CD-IN
This header is used to connect to a CD-ROM / DVD audio cable.
Front Panel Audio Header: FRONT AUDIO
If your computer case has been designed with embedded audio equipment or you are using an audio
bracket (optional). You can attach these components to the FRONT_AUDIO header of the
mainboard. First remove the jumper caps covering the FRONT_AUDIO pins. Use pins 1, 3 to
connect to the case microphone. Use pins 9,5 to connect to the earphone. If you do not intend to use
the FRONT_AUDIO panel, do not remove the jumper caps.
If the jumper caps are in place, jumper cap 1 is on pin 5, pin 6 and
jumper cap 2 is on pin 9, pin 10. If you do not intend to use the
FRONT_AUDIO panel, do not remove the jumper caps.
Attention：The front panel audio & the back panel audio can not
use simultaneously.
PWR
NC
SPD_OUT
Ground
SPD_IN
1 2
Ground
+5V
Rear out_R
NC
Rear out_L
9 10
18
KX600 Series Mainboard
1
Left In
1
2
Ground
2
3
Ground
3
4
Right In
4
5
CD-IN
SPDIF