You have to know !!!
The images and pictures in this manual are for reference only and may vary
slightly from actual product installation depending on specific hardware
models, third party components and software versions.
Unplug your computer when installing components and configuring switches
and pins.
This mainboard contains very delicate IC chips. Use a grounded wrist strap
when working with the system.
Do not touch the IC chips, leads, connectors or other components.
Unplug the AC power when you install or remove any device on the
mainboard.
Package Contents
PM800 Pro(V2.0) mainboard
IDE Cable/ FDC Cable
USB Bracket (optional)
SATA Power cord (optional)
SATA Cable (optional)
Installation and Setup Driver CD
PM800 Pro(V2.0) User Manual
Symbols
Attention ...
Following the procedures ...
Troubleshooting ...
Please refer to ...