Table of Contents
Advertisement
To Change the Measurement Display
To Use the On/Off Function
The on/off function is used for the following operations.
•
Measurements that are displayed as numbers, or as meters using the METER function,
can be turned on and off.
•
The data functions REFerence, METer, HLIMit and LLIMit can be turned on and off.
•
Any instrument function that generates a signal can be turned on and off. This includes
the CDMA Sector A Power, Sector B Power, and AWGN.
•
Trace displays, such as the CDMA Reverse Channel Spectrum Analyzer, cannot be
turned off.
The front-panel ON/OFF key is used to turn measurements, instrument functions
and data functions on or off.
Front-Panel Example
The following front-panel operation turns
1. Move the cursor in front of the unit-of-measure for the Avg Power measurement.
2. Press the ON/OFF key. The Avg Power measurement field displays the word OFF
in place of units
Chapter 3, Operating Overview
To Change the Measurement Display
off.
Avg Power
45
Advertisement
Table of Contents
