To Recall A State; Tosaveatrace; To Recall A Trace - HP 8590 E-Series User Manual

To Recall a State

retrieved.
3. Press LOAD FILE.
can
State data also be recalled by specifying the prefix and
I. Use Change Prefix to enter the prefix, or use the existing prefix.
4. Enter the register number that the state was saved under, and then press [ENTER].
To Save a Trace
Saving trace data saves the trace data and the state data.
existing prefix.
If you do not specify a prefix, the trace will be saved with a file name consisting of
3. Set up the trace to be stored.
4. Press (SAVE). If INTERNAL is underlined, press INTERNAL CARD to select CARD. Press
Trace + Card to access
TRACE C . REGISTER # and PREFIX= are displayed
6. Use the numeric keypad to enter a register number and then press [ml.
The trace data is saved with a file name consisting of a "t," the current prefix, an
underscore (-), and the register number. The "t" denotes that the file contains trace data.

To Recall a Trace

retrieved.
3. Press LOAD FILE . The trace data is placed in trace B.
Trace data can also be recalled by specifying
1. IJse Change Prefix to enter the prefix, or use the existing prefix.
the
menu that displays TRACE A , TRACE B , and TRACE C .
the
prefix and the register number:
the
register number:
on
the spectrum analyzer display.
the
Using Analyzer Features 5-13
trace data to be