HP 8590 E-Series User Manual page 326

DECT Demodulator (Option 112)
For HP 8593E, HP 85943, HP 8595E, and HP 8596E only. This option provides built-in
demodulation capability for making DECT (Digital European Cordless Telephone)
measurements. It must be used with HP 85723A measurements personality to make frequency
and deviation measurements on DECT handsets and base stations.
Option 112 is also available as a retrofit kit (Option R06) after the purchase of your spectrum
analyzer.
Noise Figure (Option 119)
HP 85719A Noise-Figure Measurement Personality provide displayed swept noise-figure and
gain measurements from 10 MHz to 2.9 GHz.
Option 119 is also available as a retrofit kit (Option R19) after the purchase of your spectrum
analyzer, or as a kit HP part number 5063-0247.
Narrow Resolution Bandwidths (Option 130)
additional narrow resolution bandwidths of 30 Hz, 100 Hz, and 300 Hz. These bandwidths
improve the spectrum analyzer sensitivity and allow you to resolve closely spaced signals.
Option 130 is also available as a retrofit kit (Option R30) after the purchase of your spectrum
analyzer, or as a kit HP part number 5063-0246.
Narrow Resolution Bandwidths and Precision Frequency Reference
(Option 140)
For HP 8591E, HP 8593E, HP 85943, HP 85953, and HP 85963 only. This option is a
combination of Option 130 and Option 004. Option 140 provides additional narrow resolution
bandwidths of 30 Hz, 100 Hz, and 300 Hz. These bandwidths improve sensitivity and allow
you to resolve closely spaced signals. The option also includes an internal precision-frequency
reference that improves stability and provides increased absolute frequency accuracy. The
precision frequency reference makes the narrow resolution bandwidths more effective and
easier to use.
DSP, Fast ADC and Digital Demodulator (Option 151)
For HP 8593E, HP 8594E, HP 85953, and HP 85963
required for fast time domain sweeps, digital demodulation measurements, and digital signal
processor-assisted (DSP) measurements.
Option 151 provides a subset of Option 101 fast time domain functions. Option 101 allows zero
span sweep times as low as 20 psec with a step resolution of 20 psec (20 psec, 40 psec, 60 psec,
and so forth.) Option 151 allows zero span sweep times as low as 40 psec with a sequence of
40 psec, 80 psec, 160 psec, 320 psec, and 160 psec step size thereafter. All trace functions are
available for these fast zero-span sweeps.
the
Since sweep times offered by Option 151 are a subset of those offered by Option 101, the
analog+ display mode is not supported for Option 151.
Measurement Personalities, Options, and Accessories
only. Option 151 supplies the hardware