HP 8590 E-Series User Manual page 234

allows you to purge all the user trace registers 0 through TRCMEM. Pressing
ERASE
Dispose User Mem and then pressing ERASE TRACEALL causes a message to
appear on the spectrum analyzer screen: If you are sure, Press key again
to purge data. Press ERASE TRACEALL again if you want to dispose of the
user trace registers. Press any other softkey if you do not want to dispose of
user state registers.
Note
If SAVE LOCK OM OFF is set to (ON), this function is disabled.
n
. Use DELETE FILE to selectively delete stored programs or variables from
spectrum analyzer memory.
Front-Panel Key Access: C-1
sets the spectrum analyzer to be compatible with an Epson LQ-570 compatible
EP Lq570
printer. Press Set B&W Printer then EP LlJ570 SML LRG
SML LRG
underlined to set up the large screen printout. This will allow for one printout
per page. The large screen printout format will not allow for printing of the
menu keys. Press Set B&W Printer then EP Lq570 SML LRG
is underlined to set up the small screen printout. This will allow for two
printouts per page.
Front-Panel Key Access: [CONFIG)
MX80
sets the spectrum analyzer to be compatible with an Epson MX80 compatible
EP
printer. Press Set B&W Printer then EP MX80 SML LRG until LRG is
SML LRG
underlined to set up the large screen printout. This will allow for one printout
per page. The large screen printout format will not allow for printing of the
menu keys. Press Set B&W Printer then EP
is underlined to set up the small screen printout. This will allow for two
printouts per page.
Front-Panel Key Access: [CONFIG]
executes a programming command displayed in the screen title area of
EXECUTE
TITLE the spectrum analyzer. The Change Title function can be used to print
programming commands in the screen title area of the display. The commands
can then be executed from the front panel of the spectrum analyzer, without
an external computer, by pressing the EXECUTE TITLE softkey.
Front-Panel Key Access: (CAL)
exits the EDIT FLATNESS softkey menu. This is a service calibration function
EXIT
and is designed for service use only.
Front-Panel Key Access: ICALl
returns the spectrum analyzer to the state it was in before the current catalog
E x i t
function was invoked. It clears the catalog display and returns to a normal
Cat alog
spectrum analyzer display.
Front-Panel Key Access: &ZZiJ or m
until LRG is
until SML
MX80
SML LRG until SML
Key Descriptions 7-41