Adjacent Channel Power Graph - HP 8590 E-Series User Manual

11.
To enable the graph marker, press GRPH MKR OH OFF so (ON) is underlined. Delta
frequency, delta amplitude, and absolute amplitude values are displayed for the marker
position. The marker position can be changed with the RPG knob, step keys, or data keys.
Press Previous Menu . Press MEAS OFF to turn the measurement off and exit the power
12.
menu, or press another measurement key to stop the current measurement and start a new
measurement.
Note
If the power menus have been exited without turning the power measurement
off (by pressing another front panel key), press the I-) key twice to
return to the last power menu used.
I
I
CENTER 825 0300 MHZ
Figure 4-40. Adjacent Channel Power Graph
SINGLE
SWEEP
CENTER
I
Making Measurements 4-47