HP 8590 E-Series User Manual page 359

F
fast ADC
optional, lo-10
fast Fourier transform
stop frequency, 7-43
fast Fourier transform function, 4-2, 7-43
fast time domain sweeps (Option lOl), 10-8
features
front panel, 2-l
FFT
markers, 7-53
FFT compatibility, 7-43
FFT display annotation, 4-2
FFT marker frequency, 7-53
FFT MARKERS, 7-42
FFT measurement, 4-2, 7-27, 7-80
automatic, 4-5
manual, 4-3
setup, 4-3
FFT Menu, 7-43
FFT OFF, 7-43
FFT STOP FREQ, 7-43
fine-focus control, 2-9
FINE TUNE DAC, 7-2, 7-43
firmware
optional, 10-l 1
firmware date, l-8
fixed, limit line type, 7-50
fix-tuned receiver, 3-24
FLAT, 5-26, 7-43
flatness
factory defaults, 7-48
flatness correction constants, 7-36, 7-43
Flatness Data, 7-2, 7-43
FLATNESS EXT DET IN, 2-5
FM COIL DRIVE, 7-2, 7-44
FM GAIN, 4-14, 7-2, 7-44
FM OFFSET, 7-2, 7-44
FM SPAN, 7-3, 7-44
FORMAT CARD, 5-l 1, 7-44
format date, 7-31
Fourier transform
See also fast Fourier transform, 7-43
Fourier transform measurement, 7-43
FREE RUN, 7-44
FREQ DIAG, 7-3, 7-44
FREQ DISC NORM OFF, 7-44
FREQ OFFSET, 7-45
frequency
stop, 7-82
FREQUENCY, 2-1, 2-13, 7-45
frequency and amplitude self-calibration
routine, 1-8, 7-14
frequency demodulation, 7-33
frequency extension to 26.5 GHz (Option
026)
APC-3.5 connector, 10-7
frequency extension to 26.5 GHz (Option
027)
N-Type connector, 10-7
frequency offset, 7-45
frequency self-calibration, 7-14
frequency span, 7-80
changing to full span, 7-45
front panel execution of programming
commands, 7-41
front-panel features, 2-l-4
front panel protective cover (Option 040),
10-7
FRQ DISC NORM OFF, 7-3
FULL SPAN, 7-45
functional check of Option 105, 4-36
function coupling, 7-10
fuse, l-5
fuse holder, 2-6
G
gain
internal spectrum analyzer, 7-10
gate
coupling functions, 7-32
using the gate utility, 4-19
gate control, 7-32
edge or level triggering, 7-46
Option 105, 4-38
Gate Control, 7-45
GATE CTL EDGE LVL, 7-46
operation, 4-38
gate definition, 7-32
gate delay
determining the gate delay, 4-26
setting gate delay outside the Gate Utility,
4-33
GATE DELAY, 7-46
gate length
determining the gate length, 4-26
setting gate length outside the Gate Utility
4-33
GATE LENGTH, 7-46
GATE ON OFF, 7-46
GATE OUTPUT, 2-6
GATE TRIGGER INPUT, 2-6
gate utility
exit, 7-42
exiting, 7-47
use of, 4-19, 4-20
GATE UTILITY, 7-47
gate utility coupling, 7-32
resolution bandwidth, 7-30
Index-7