8. A graph of the channel power as a function of frequency can be calculated and displayed
by pressing PWRGRAPH ON OFF so (ON) is underlined. The numerical channel power results
are not displayed.
The top graticule line represents the power as indicated by the reference level (REF)
displayed value.
frequency and amplitude are displayed.
menu, or press another measurement key to stop the current measurement and start a new
measurement.
Note
If the power menus have been exited without turning the power measurement
off (by pressing another front panel key), press the (j-1 key twice to
return to the last power menu used.
Figure 4-42. Channel Power Graph
SINGLE
CENTER
FRED
ON OFF
Making Measurements 4-49