HP 8590 E-Series User Manual page 366

PRI, 7-30, 7-39
pulse width, 7-30, 7-39
reference edge, 7-39
time gate utility, 7-70
pulse repetition interval, 4-25, 7-39
pulse width, 4-25, 7-39
PURGE AMP COR, 5-38, 7-70
PURGE LIMITS, 5-19, 5-22, 7-70
PWR SWP ON OFF, 7-71
Q
QP DET ON OFF, 7-3, 7-72
QPD OFFSET, 7-3, 7-72
QPD RST ON OFF, 7-3, 7-72
QP GAIN ON OFF, 7-3, 7-72
QP Xl0 ON OFF, 7-72
quasi-peak
clearing data, 7-23
detector, 7-72
marker amplitude value, 7-6
measurement routine, 7-52
normal marker, 7-54
signal amplification, 7-72
Quasi Peak, 7-72
quasi-peak detection
use with Option 105, 4-23
quasi-peak detector and AM/FM demodulator
with speaker (Option 103), 10-9
R
rack mount kit (Option 908), lo-12
rack mount kit with handles (Option 909),
10-12
rack slide kit, lo-16
ratio
video bandwidth to resolution bandwidth,
7-90
real-time clock, 7-85
set date, 7-79
set time, 7-79
time and date display, 7-85
rear-panel battery information label, 2-22
rear-panel features, 2-5-7
RECALL, 2-2, 7-72
RECALL AMP COR, 7-73
recalling a display image from the memory
card, 5-14, 7-15
recalling a DLP from the memory card, 7-15
recalling amplitude correction factors from
analyzer memory, 5-8-9
recalling amplitude correction factors from
the memory card, 5-15
recalling a program from the memory card,
recalling a state from analyzer memory, 5-6
Index-14
recalling a state from the memory card,
5-13, 7-15
recalling a trace from analyzer memory, 5-7,
7-49
recalling a trace from the memory card,
5-13-14, 7-15
recalling limit lines from analyzer memory,
5-8-9
recalling limit-line tables from the memory
card, 5-15
RECALL LIMIT, 7-73
reduced frequency accuracy (Option 713),
10-12
reference connector, l-8
reference detector
+ lOV, 7-4
ground, 7-47
reference level, 7-73
reference level offset, 7-73
reflection calibration measurements, 4- 17
REF LVL, 7-73
REF LVL OFFSET, 7-73
relative, limit line type, 7-50
remote command
dispose all, 7-39, 7-40, 7-41
front panel execution, 7-41
remote operation, 7-27
RES BW AUTO MAN, 7-74
resolution bandwidth, 7-74
resolving signals, 3-2-5
resolution bandwidth coupling, 7-10
gate utility, 7-30
resolution bandwidths
optional, lo-10
resolution of marker counter, 7-26
RETURN, 7-74
return loss, measuring, 4-18
RF bridge, lo-13
RF limiters, lo-13
RF OUT 500, 2-4
RF OUT 753, 2-4
RPG knob, 2-8
RPG TITLE, 7-74
RS-232 and Parallel (Option 043), 10-7
RS-232 cable, lo-16
RS-232 interface connector, 2-7
S
sales and service offices, 9-5
sample detection
use with Option 105, 4-23
sample detection mode, 7-34
SAVE, 2-2, 7-75