Getting Started With The Command Line Utility - Adaptec 51245 User Manual

Getting Started with the Command
Line Utility
In this chapter...
Installing the Command Line Utility ...................................................................................... 8
Starting the Command Line Utility ...................................................................................... 10
This chapter explains how your Adaptec RAID controllers support the use of the ARCCONF
command line utility.
This utility allows you to:
Create and delete logical drives
●
Display and modify configuration settings
●
Copy configurations from one computer to another
●
Recover from a failed physical device and rebuild an affected logical drive
●
Flash new firmware and BIOS onto the controller
●
Enable the controller to check the removal and connection of any disk drives
●
Automatically update Windows drivers
●
Provides access to the status and event logs of a controller
●
Isolate problems and determine their causes
●
1