Setting The Number Of Redial Attempts (Number Of Redials Setting) - Triumph Adler DCC 2520 Instruction Handbook Manual

Setting the Number of Redial Attempts (Number of Redials setting)

Sets the number of times the fax will automatically attempt to redial a number when the other party's
fax line is busy or some other trouble occurs with the connection.
NOTE: The number of redial attempts can be set here to any number between 0 and 14.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [ ] cursor key until Retry Times is highlighted.
4
Press the [Change #] key.
5 Use the [+] or [-] key to select the
desired number of redial attempts.
6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode settings.
Various Settings and Registration
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
Default setting screen
Retry Times
For fax RX
(00 ~. 14).
.03
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back
7-9