Managing Information For A Scheduled Communication (Editing A Communication In Memory); Printing Out A Sample Image Of Waiting Documents - Triumph Adler DCC 2520 Instruction Handbook Manual

Fax Operation (Various Functions)
Managing Information for a Scheduled Communication (Editing a
Communication in Memory)
You can modify certain information relating to a scheduled communication that uses the timer or
even cancel the communication completely. You can also print out a sample image of the
corresponding documents as well as initiate (force-start) the communication without waiting for the
actually scheduled start time.
NOTE: If the scheduled communication begins automatically while you are in the middle of any
editing operation, it will impossible to continue that procedure.

Printing Out a Sample Image of Waiting Documents

If you want to check the documents that correspond to a specific transmission that is in memory and
waiting for transmission, you can print out a sample page of those documents.
NOTE: Even if you print out a sample image of the documents, the transmission will be carried out
on schedule.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the [Application] key. The
Application screen will appear.
2 Press the [Reserved TX status] key.
The content of the first schedule
communication will be displayed.
3
Use the [ ] and/or [ ] cursor keys to
switch to the communication that you
want.
3-18
Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Option screen
Select item.
Sub.conf. Reserved
TX Polling
box input TX status
Sub.conf. TX result
RX Polling
box output on LCD
Print encr RX result
data box on LCD
Basic Application
Reserved communication status.
Reservation status
Doc #: 025. Send (No.party:
123456
Start Time: 22:22. TX No.of pages:
Register Print Report
Register Print Report
001. )
001.
1/2.
Memory
OCT-11
Memory
OCT-11
Memory
OCT-11