Setting The Document Size For Scanning From The Document Processor (Scan From Dp Setting) - Triumph Adler DCC 2520 Instruction Handbook Manual

Various Settings and Registration
Setting the Document Size for Scanning from the Document Processor (Scan
from DP setting)
Select here whether documents that are set in the Document Processor will be scanned as
8
paper feed).
NOTE: It is necessary to select Standard size here when transmitting both sides of duplex (2-sided)
documents. (Refer to Sending 2-Sided Documents (Duplex Transmission) on page 3-2.)
If you select Long original (Long orig.) here, it will not be possible to have documents rotated for
transmission (Refer to Rotating the Document Image for Transmission (Rotate & Transmit function)
on page 1-17.)
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [ ] key until Scan from Doc. P. (Doc. P. scanning) is highlighted.
4
Press the [Change #] key.
5 Select the desired original size setting
by pressing either the [Standard size]
key or the [Long original] ([Long orig.])
key, as appropriate.
6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
7-10
× 11" [A4R] or other such standard size paper, or as long documents (in the direction of the
1/2
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
Default setting screen
Scan from Doc.P.
Standard
size
Long
original
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back