Initiating Fax Reception From A Connected Telephone (Remote Switching); Changing The Remote Switching Number - Triumph Adler DCC 2520 Instruction Handbook Manual

Other Features of this Fax

Initiating Fax Reception From A Connected Telephone (Remote Switching)

Remote Switching lets you initiate fax reception from a telephone that is connected to this fax
machine. This function is thus convenient if you want to be able to initiate fax reception from a
location separate from the fax machine itself.
NOTE: Remote Switching is only possible if a separately purchased telephone with tone dialing
capabilities is connected to this fax machine. Even if the phone you use has tone dialing
capabilities, depending upon the model of the phone, this function may not work as expected. For
further information, contact your service representative, an authorized service center or the place or
purchase.

Changing the Remote Switching Number

The factory default setting for the Remote Switching Number is 55, but you can change this if you
want.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the [Register] key. The Register
screen will appear.
2 Press the [Remote SW dial] key. Remote
Switching registration is now possible.
3
Use the numeric keys to enter the new
Remote Switching Number (2 digits).
NOTE: If you want to change the entered number, use the [ ] and/or [ ] keys to move the cursor to
the desired location.
If you want to reset the displayed number to 00, simply press the Stop/Clear key.
4 Press the [Confirm] key. Registration of the new Remote Reception Number is complete.
5
If you are finished making settings, press the Reset key.
5-8
Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application
Register remote switch dial.
Remote Switch
Enter using # key.
55. ( 2 digits)
Register Print Report
Encryption
key
Network
FAX
Register Print Report
Back
Memory
OCT-11