Using A Program Key - Triumph Adler DCC 2520 Instruction Handbook Manual

Other Features of this Fax
Changing destinations
12
Select one destination to be changed,
and then press the [Change] key.
13 Enter the new fax number.
You can enter the fax number using the numeric keys, abbreviated numbers, one-touch keys and
the address book. Chain dial keys can be used as well.
14 Press the [Finish dest. Set] ([Dest. set]) key.
15
Press the [Close] key.
Once you are finished making all of the modification that you want, go directly to step 18.
16 Enter the abbreviated number of an
unregistered speed-dial key (0001 -
1000).
NOTE: Once a 4-digit number is
entered, that number may be changed
using the [+] and [-] keys.
17 Press the [Close] key.
18 Once you are finished modifying all of the items that you want, press the [OK] key. The message
display will return to the same screen as was displayed in step 3.
If you want to continue modifying other program keys, repeat steps 3 through 18. If you are finished
deleting program keys, press the Reset key.

Using a Program Key

1
If the operation involves the transmission of
documents, set the documents you want to transmit. If
it involves a polling reception, go directly to step 5.
2 If you want to change the transmission conditions, such as the resolution and contrast, press the
[TX setting] key. If you do NOT want to change the current conditions, go directly to step 5.
3
Press the key that corresponds to the desired item and change the information as desired. (To
change each transmission condition, refer to pages 2-5 and 2-6.)
5-48
dial.
al(Send) 0006.
el des.
ABC 03.
FREE + 1236546.
Register the dial.
Program Dial(Send) 0006.
Abbreviation
Enter using # key.
0006.
( 4 digits)
Memory usage:
OCT-11-2005 16:00
Back Close
Add
Change
Delete
1/1.
Back
.0%