Modifying Or Deleting Reject Fax Numbers - Triumph Adler DCC 2520 Instruction Handbook Manual

2
Press the [TX/RX Restrict.] key.
3 Press the [Reject FAX No.] key.
4
Press an unregistered key. The
information will be displayed for all keys
that have already been registered.
5
Use the numeric keys to enter the
desired Reject Fax Number. (Maximum
20 digits)
You can use the [ ] and/or [ ] keys to
move the cursor to a desired location,
and you can clear the entered number
by pressing the [Delete] key.
6 Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other Reject Fax Numbers, repeat steps 4 through 6. If you are
finished registering Reject Fax Numbers, press the Reset key.

Modifying or Deleting Reject Fax Numbers

NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Perform steps 1 through 3 of Registering New Reject Fax Numbers on page 5-54.
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application Register
Register in TX/RX Restriction list.
Item option
Permit Permit
FAX No. ID No.
Register in TX/RX Restriction list.
Reject FAX No.
#01 12345678901234567890 .
#02
#03
Register in TX/RX Restriction list.
Rejected FAX number 002.
Detail contents
Enter using # key.
(MAX. 20 digits)
._
Other Features of this Fax
Encryption
key
Network
FAX
Print Report
Reject
FAX No.
#04 06123456 .
#05
Back
Delete
5-55