Modifying Or Deleting Permit Fax Numbers; Registering New Permit Ids - Triumph Adler DCC 2520 Instruction Handbook Manual

Other Features of this Fax

Modifying or Deleting Permit Fax Numbers

NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Perform steps 1 through 3 of Registering New Permit Fax Numbers on page 5-50.
2 Press the key which displays the Permit
Fax Number you want to modify or
delete.
3 If you want to delete the registered
Permit Fax Number, press the [Delete]
key and then go to the next step. If you
want to modify the registered
information, press the [Change contents]
key and then go directly to step 5.
> Deleting a Permit Fax Number
4 Press the [Yes] key.
The message display will return to the same screen as was displayed in step 2. If you are finished
deleting Permit Fax Numbers, press the Reset key.
> Modifying information
5 Press the Stop/Clear key to delete the
old number and then enter the new
Permit Fax Number, or use the [ ]
and/or [ ] keys to move the cursor to a
desired location and reenter the number
as desired. Pressing the [Delete] key will
delete the number directly above the
cursor.
6
Press the [OK] key. The message display will return to the same screen as was displayed in step 2.
Once you are finished modifying and/or deleting Permit Fax Numbers, press the Reset key.

Registering New Permit IDs

NOTE: You can register up to 5 numbers as Permit IDs in this fax.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
5-52
Register in TX/RX Restriction list.
Permit FAX No.
#01 12345678 .
#02
#03
Register in TX/RX Restriction list.
Permit FAX No. 1.
Contents change/del.
12345678.
Change
contents
Register in TX/RX Restriction list.
Permit FAX No. 1.
Detail contents
Enter using # key.
(MAX. 20 digits)
12345678_ .
#04 0612345.
#05 5555.
Back
Delete
Back
Delete