Dialing With A Chain Dial Key - Triumph Adler DCC 2520 Instruction Handbook Manual

Fax Operation (Various Functions)
> Modifying registered information
6
If you want to modify the abbreviated number (the displayed number of the speed-dial key under
which the chain dial key is registered), press the [Abbr. #] key.
If you want to modify any other basic information, press the key that corresponds to that information.
To modify information, refer to the corresponding step under Registering New Chain Dial Keys on
page 3-13.
7 Enter the abbreviated number of an
unregistered speed-dial key (0001 -
1000).
NOTE: Once a 4-digit number is
entered, that number may be changed
using the [+] and [-] keys.
8
Press the [Close] key.
9 Once you are finished modifying all of the items that you want, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other chain dial keys, repeat steps 3 through 9.
10 If you are finished making settings, press the Reset key to return to the initial mode.

Dialing With a Chain Dial Key

NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
If the operation involves the transmission of
documents, set the documents you want to transmit.
2 Press the desired speed-dial key that
was registered as a chain dial key.
3-16
Register the dial.
Chain 0003.
Abbreviation
Enter using # key.
0003.
( 4 digits)
Ready for fax transmission.
Enter Destination.
Dest FREE +.
ABC
FREE .
Address TX
Abbrev.
book setting
Basic Application
Back
Register Print Report
Memory
OCT-11