When The Fax Lamp Is Lit; Cautions Before Disconnecting The Power Cord; If A Power Failure Report Is Printed Out - Triumph Adler DCC 2520 Instruction Handbook Manual

Troubleshooting

When the Fax Lamp is Lit...

During a fax communication that use the memory,
documents will be entered into memory and, to indicate
this, the Fax lamp will light. The Fax lamp will also light
when documents are received directly into memory
(Memory Reception) during copying in the Copy
Operation mode.
NOTE: The Fax lamp will flash while documents are
being entered into memory.

CAUTIONS before Disconnecting the Power Cord

As electricity is necessary to retain documents in memory, BE SURE to check whether the Fax data
indicator is lit or not BEFORE intentionally disconnecting the power cord to this machine. If the
indicator IS lit indicating there ARE documents in memory, print out all important documents from
memory and then make sure that the Fax lamp is out BEFORE disconnecting the power.
NOTE: The Imaging Memory back-up function of this machine will protect the contents of memory
for up to 60 minutes (32 MB of optional memory must be installed) even if, for any reason, power to
the fax is disconnected or lost.

If a Power Failure Report is Printed Out...

If documents, schedule communications or other information contained in memory are lost because
power to the fax is disconnected or lost, a Power Failure Report will be printed out once power is
restored. Refer to this report to find out what information was lost.
NOTE: If no data or information was lost, a Power Failure Report will not be printed out.
4-2