Turning Fax Forwarding On/Off - Triumph Adler DCC 2520 Instruction Handbook Manual

Other Features of this Fax
2
Press the [Fax Forwarding] key. The
currently registered information will be
displayed.
3 Check that information and press the key that corresponds to any item that you want to modify.
Refer to Registering the Fax Forwarding Information on page 5-34 in order to modify that
information.
4 Once you are finished modifying information, press the [OK] key. The message display will return to
the same screen as was displayed in step 2. If you are finished making settings, press the Reset
key.

Turning Fax Forwarding ON/OFF

In order to use Fax Forwarding, it is necessary to turn it ON in advance.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2
Press the [Fax Default] key.
3 Press the [ ] cursor key until Fax forwarding is highlighted.
4
Press the [Change #] key.
5
To turn Fax Forwarding ON, press the
[ON] key.
5-36
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application Register
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
Default setting screen
Fax Forwarding
On
Off
Encryption
key
Network
FAX
Print Report
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back