Turning Tx/Rx Restriction On/Off - Triumph Adler DCC 2520 Instruction Handbook Manual

Other Features of this Fax
2
Press the key which displays the Reject
Fax Number you want to modify or
delete.
3 If you want to delete the registered
Reject Fax Number, press the [Delete]
key and then go to the next step. If you
want to modify the registered
information, press the [Change contents]
key and then go directly to step 5.
Deleting a Reject Fax Number
4
Press the [Yes] key. The message display will return to the same screen as was displayed in step 2.
If you are finished deleting Reject Fax Numbers, press the Reset key.
Modifying information
5
Press the Stop/Clear key to delete the
old number and then enter the new
Reject Fax Number, or use the [ ]
and/or [ ] keys to move the cursor to a
desired location and reenter the number
as desired. Pressing the [Delete] key will
delete the number directly above the
cursor.
6 Press the [OK] key. The message display will return to the same screen as was displayed in step 2.
Once you are finished modifying and/or deleting Reject Fax Numbers, press the Reset key.

Turning TX/RX Restriction ON/OFF

You can select to only allow fax transmission to those destinations that are registered in your
address book and those registered as Permit Fax Numbers. You can also select to only allow fax
reception from those facsimiles that are registered in your address book and those registered as
Permit Fax Numbers, or to reject those receptions from facsimiles registered as Reject Fax
Numbers. (Refer to Restricting Communication To/From Specific Destinations (TX/RX Restriction)
on page 5-50.)
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
5-56
Register in TX/RX Restriction list.
Reject FAX No.
#01 12345678901234567890 .
#02
#03
Register in TX/RX Restriction list.
Rejected FAX number 002.
Contents change/del.
.12345678901234567890
Change
contents
Register in TX/RX Restriction list.
Rejected FAX number 001.
Detail contents
Enter using # key.
(MAX. 20 digits)
.12345678901234567890
#04 06123456 .
#05
Back
Delete
Back
Output
Delete